When Fire Protection of Critical Equipment, Personnel or Production is Required... PROCON 2000 is there!

Fire safety, you don't think about it until it's needed. Fire safety, gets only one chance and it must do its job or losses of equipment, production or personnel lives can be staggering.

Protective Concepts, Inc. has been designing and manufacturing flexible passive fire protection (PFP) jackets since 1986 to protect lives and equipment.
Protective Concepts has been setting the standards by which others are measured.

Protective Concepts has passed numerous hydrocarbon or "UL-1709" fire test and was the first to pass a jet-blast fire test in 1991. Protective Concepts passed the "OTI-95634" jet blast fire test in 1998 with DNV and Lloyd's witness. Since then, Protective Concepts has received jet-blast fire certification from DNV, ABS and Lloyd's Register.

Many offshore platforms now require overpressure blast test certifications. In 1999, with Lloyd's witness, Protective Concepts survived three successive over-pressure blasts test of 0.5, 1.0 and 1.4 bar. Protective Concepts now has ABS and Lloyd's Register certification for over-pressure blast.

Protective Concepts patented custom-designed, form-fitting, fire protection jackets are light-weight, weather-resistant and durable.

Quality and value are designed and manufactured into every jacket.

When it comes to installation and removal, our jackets make all others impractical. Wire, handtools, banding straps and an army of installers are not required to install Protective Concepts "PFP" jackets. Everything needed for installation is included with the jacket. Drilling and tapping holes, special brackets, welding, hot work permits are not required. This is especially important when you can replace old "PFP" jackets with Protective Concepts jackets and not have to shut-down or remove equipment from service.

We understand the time and costs associated with installing fire protection jackets. You want t something that is easy to carry up six flights of stairs and when you get there, you place it on the part, fit the velcro flaps and cinch up the straps, you're done! No special training is required and fire protection integrity is assured.

Are you getting all of the key elements of fire protection?

• Remain intact through lengthy exposure to the environment; UV exposure, salt water, cold temperatures, chemicals, and impacts.
• Lightweight, easy to carry and position on part.
• Block flame paths and retard heat flow.
• Simple and easy to install or remove.
• Replace worn-out PFP "in-place" without shutting down or removal of equipment.
• No tools or special training required to install or remove for inspection.
• Tested and certified products, meet and exceed insurance underwriters requirements.
• Jacket materials are inert and will not corrode protected part.
• Quick delivery.
• PCI can survey equipment to be protected and take dimensional responsibility for the fit.
• PCI can repair or modify in the field.
• Value for your fire protection budget.

Certification

Click image to enlarge

Design

Protective Concepts pioneered the passive fire protection field. We were first to use flaps with Velcro and straps and D-rings. Others may try to copy Protective Concepts designs, but our years of experience and continuous improvements of the ProCon 2000 exclusive materials, keep Protective Concepts technically at the head of the pack. Why use imitations, when for the same price, or less, you can have the best.

Protective Concepts developed the design practices, the heat flow calculations and the manufacturing methods to achieve fire protection results of thickness and weight which other fire protection providers can't match. Independent laboratories test data substantiate our claims of negligible temperature rise for the first 15-20 minutes in a fire. At the same time, Protective Concepts jacket designs can survive repeated blasts and still maintain their fire protection integrity. Protective Concepts robust design, material choices and manufacturing techniques equal years of reliable service. Isn't this what you want for your fire protection budget?

With representatives in most major oil/gas and petrochemical markets, we are ready to serve you. Contact Protective Concepts by phone, or fax, or e-mail Dan or Alan, for more information on Protective Concepts "PFP" or other products for freeze or corrosion protection. Join our growing list of customers who will tell you about the value and quality of our product and our total commitment to customer service.

PROTECTIVE CONCEPTS, INC..